Acrimetal

Acrimetal is a premium, rust-inhibitive, interior/exterior acrylic coating for most clean metal surfaces. Use with Acrimetal Primer/Finish for an extremely durable system with excellent adhesion to ferrous and galvanized metals, including bare metal and/or surfaces with light rust. Topcoat with Acrimetal Satin, Semi Gloss, or High Gloss. For an eggshell finish, simply apply two more coats of Acrimetal Primer/Finish.

  • Extremely durable
  • Excellent adhesion
  • Soap and water clean up
  • Contains no lead or mercury
  • VOC compliant

For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.

SHEENS

Velvet/Primer

The velvet sheen can be used as a direct to metal primer for a variety of finishes or alone as a primer/finish system. It is ideal for projects where a deep, rich look is desired yet only a minimal amount of sheen is needed.

TDS | SDS

TDS(Español)

Satin

This popular finish will reduce dirt pick-up and is washable. The satin sheen is ideal for projects where a deep, rich look and some sheen is desired to withstand moderate traffic.

TDS | SDS

TDS(Español)

Semigloss

This high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease, and moisture. It is ideal for projects in high traffic areas.

TDS | SDS

TDS(Español)

Gloss

Our highest sheen available, it is highly washable and perfect for areas that are more susceptible to dirt, grease, and moisture. It is ideal for projects in high traffic areas.

TDS | SDS

TDS(Español)

  • icons_0003_Vector-Smart-Object

    Coverage

    Approximately 325-375 square feet per gallon.

  • icons_0002_Vector-Smart-Object

    Drying Time

    1 hour to touch, and 4 hours for recoat at 70°F and 50% relative humidity.

  • icons_0001_Vector-Smart-Object

    Disposal

    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit concellocarnota.com/paint-recycling. Please re-use or recycle.

SURFACE PREP

  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0007_Vector-Smart-Object

    PRIME unsealed surfaces such as ferrous metal, plaster/wallboard, cedar, redwood, and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 35°F or when temperatures are expected to drop below 35°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediately with warm soapy water. Follow with a clear rinse.

Specifications for Acrimetal DTM

Volume Solids 36.5% 36.7% 40.6% 41.4%
Weight Per Gallon 10.5 (LB) 10.11 (LB) 10.35 (LB) 10.2 (LB)
Gloss 20-25%@85° 10%@60° 10-20%@60° 45-55%@75+°
VOC* (minus water) 99 g/L 99.4 g/L 99.8 g/L 98.1 g/L