StratusXT Exterior Paint

Built to protect your home or building from our Pacific Northwest weather, StratusXT is a 100% acrylic exterior coating with good color retention and durability. Formulated for our climate, StratusXT is ideal for use on any commercial or residential building year round. Easy to apply by brush, roller, or sprayer, StratusXT is suitable for most exterior substrates including wood, concrete, stucco, and manufactured siding. Designed to withstand climate shifts from extreme heat to high humidity, StratusXT is a versatile exterior coating available in Flat, Velvet, and Satin sheens.

  • All-weather exterior formulation for the Pacific Northwest
  • 100% acrylic resin
  • Inhibits mold and mildew growth
  • Good color retention
  • Easy application and clean up
  • Low temp application down to 35˚F
  • Limited 15 year warranty

For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.

SHEENS

Flat

A flat finish will minimize visibility of surface imperfections due to light refraction. It is best used for rough surfaces, or surfaces that are regularly repainted or touched up.

TDS | SDS

Velvet

Ideal for projects where a deep, rich look is desired yet only a minimal sheen is needed. This finish has a minimal sheen that is mostly seen at an angle. It reduces dirt pick-up and provides some washability. Ideal for full body exterior work where some sheen is desired. Best used when the surface is free of major imperfections.

TDS | SDS

Satin

This finish will minimize dirt pick-up and is washable. Ideal for full body exterior work where some sheen is desired. Best used when the surface is free of major imperfections.

TDS | SDS

  • icons_0003_Vector-Smart-Object

    Coverage

    Approximately 250 to 400 square feet per gallon. Two coats recommended. Coverage depends on porosity and profile of surface and can be less when making a significant change in color.

  • icons_0002_Vector-Smart-Object

    Drying Time

    1 hour to touch, and 2 hours for recoat at 70°F and 50% relative humidity.

  • icons_0001_Vector-Smart-Object

    Disposal

    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit concellocarnota.com/paint-recycling. Please re-use or recycle.

SURFACE PREP

  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0007_Vector-Smart-Object

    PRIME unsealed surfaces such as ferrous metal, plaster/wallboard, cedar, redwood, and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 35°F or when temperatures are expected to drop below 35°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediately with warm soapy water. Follow with a clear rinse.

LIMITED 15 YEAR WARRANTY: If this Miller Paint StratusXT Paint, when applied in accordance with label instructions and technical data sheets, blisters or peels within 15 years from the date of purchase , then Miller Paint Co., Inc.  will either provide an equivalent paint product in an amount sufficient for repair free of charge, or refund the original purchase price, but only upon presentation of original proof of purchase. This warranty, which excludes failure due to deterioration of the underlying surface, structural defects or failure of previous paint, inadequate surface preparation or application of the product, extends only to the owner of the single-family home to which the paint was applied during such owner’s occupancy, may not be transferred or assigned, and is your sole and exclusive remedy. THIS WARRANTY DOES NOT INCLUDE LABOR OR THE COST OF LABOR FOR THE APPLICATION OF ANY PRODUCT, AND EXCLUDES ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion of incidental or consequential damages, so the limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.

Blistering and peeling of exterior house paints down to the bare wood is usually caused by moisture behind the paint film. Moisture pressure forces the paint away from the surface. Sources of excess moisture in the wood must be eliminated prior to repainting. Old, unsound multiple coat paint systems may be subject to peeling when repainted due to the added weight and stress created by paint layers. In such cases, all old paint layers must be removed back to bare wood before repainting.

The contents of this can should be well stirred or boxed by pouring from one can to another to assure color uniformity. More than one can of the same color should be mixed together as you progress with your work. Check color before painting, not responsible for application of wrong shade. Custom colors are not returnable.

Specifications for StratusXT

Volume Solids 35.4% 35.0% 32.7%
VISCOSITY 100-105 KU 100-105 KU 100-105 KU
Weight Per Gallon 11.4 (LB) 10.9 (LB) 10.42 (LB)
Gloss 0-5%@60° 0-5%@85° 5-10%@60° 7-15%@85° 10-20%@60° 30-45%@85°
VOC* (minus water) 46 g/L 48 g/L 46 g/L
SHEEN

PAPER, CANVAS, SILK, GLASS, SATIN, SEMIGLOSS